Skip to main content

What do the LEDs on Plasma Cloud Access Points mean?

Nicol Dalla Longa
  • Updated

The status of the Plasma Cloud Access Points is indicated by their LEDs. The following table summarizes how the status "online", "offline", "boot" and "mesh recovery" are represented by the LEDs on the Plasma Cloud Access Points.

  Online Offline Boot Mesh Recovery
 PA300
 PA300E
 PA1200
 PAX1800 

PA300-blue.svg

solid blue

PA300-red.svg

solid red

PA300-solidpurple-solidwhite.svg

solid purple, then solid white

PA300-blinkingred.svg

blinking red
 PA2200

PA2200-leds-on.svg

power solid red, status solid blue

PA2200-leds-offline.svg

power solid red, status blinking blue

PA2200-leds-boot.svg

power blinking red, status off

PA2200-leds-mesh-recovery.svg

power blinking red, status blinking blue
note3.png

The PA2200 has 7 LEDs. Below you can see a schematic overview of them.

PA2200-leds-overview.svg

 From left to right, you can see:

  • The power LED;
  • 2x Ethernet LEDs, indicating whether the Ethernet ports are currently in use;
  • 3x radio LEDs, indicating whether the radios are currently in use;
  • The status LED.

LED Modes

LEDs on Plasma Cloud Access Points can be set to three different modes, depending on the amount of information you wish the LEDs to provide. Read more on LED modes and how to configure them in this article.

Related articles

Comments

0 comments

Article is closed for comments.