The Port Settings page allows you to configure the selected port.

Ports can be configured in two ways:

Device Details Page Tabs: Use the interactive device graphic within the VLAN, PoE Scheduling or Port Isolation tabs to change port configurations.
Port Settings Page: Enable or disable settings using toggles directly on this page.

While the VLAN, PoE Scheduling and Port Isolation tabs focus on specific features, the Port Settings page consolidates all port settings into a single view for comprehensive management.

Accessing the Port Details Page

Follow these steps to access the Port Settings page:

Log into the Plasma Cloud console;
Select the Organisation and Network containing the device of interest from top-right menu;
Navigate to Switches or Media Converter in the main menu on the left;
Click on your device of interest in the table. This will take you to the Device Details page;
Navigate to either the Ports / VLAN / PoE Scheduling / Port isolation tab;
Click on a port inside the table to open the Port Settings page.

Port Details page

Below you can find an example port details page.

Features on the Port Details Page

Each feature can be enabled or customized using toggles and drop-down menus:

Title

Displays the port name (e.g., Ethernet + number or SFP + number).

Description

Add custom notes in the description box.

Link

Enable or disable traffic flow between the port and its connected device. The link speed defaults to "Auto" but can be adjusted using the drop-down. When configuring a specific port link speed, ensure it matches the link speed of the connected device.

Note: Manual link speed settings are not available for 2.5G Ethernet ports as "Auto" mode is mandatory.

Throttling

Set custom upload and download throughput limits. For more instructions, please refer to this article.

Isolation

Enable port isolation to segregate wired clients by preventing inter-port traffic exchange. For details, please refer to this article.

PoE

Activate Power over Ethernet to supply power to connected devices. Assign a custom PoE schedule to power devices on or off as needed. For details, please refer to this article.

VLAN

Configure logical networks by assigning allowed and/or default VLANs to the port using the drop-down menus. To understand the different modes, please refer to this article.

Mirroring

Copy network packets from one port (source) to another port (destination) for monitoring or debugging. For details, please refer to this article.