How to configure Wired Clients Settings in your Network?

This guide will walk you through managing wired client settings at the network level. If you want to manage wired clients for an individual access point, please refer to this article.

To learn what wired clients are and understand the differences between the wired clients modes (Routing, Bridge, Merge with SSID), please see this article.

Network Wired Client Settings

You can configure wired clients settings for all access points within the same network. To do so, follow these steps:

1. Log into the Plasma Cloud console;
2. Select the Organization and Network associated with your wired clients from the top right menu;
3. Navigate to Settings > Network in the main menu on the left;
4. Find the Wired clients configuration section and select your desired mode.

Troubleshooting

If Network settings are configured to merge all wired clients with an SSID but the specified SSID hasn't been assigned to an Access Point within that network, a wired client warning will be triggered. To learn how to resolve this issue, please refer to this article.